LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2015 >> Pilot Touring, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Fuel And Emissions Systems) >> How to Set Readiness Codes >> Catalytic Converter Monitor and Readiness Code >> Notes

Catalytic Converter Monitor and Readiness Code: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • During the procedure, do not turn the ignition switch to ACC (I) or to LOCK (0).
  • All readiness codes are cleared when the battery is disconnected, if the DTCs have been cleared, or if the PCM is reset with the HDS.
  • Low ambient temperatures or excessive stop-and-go traffic may increase the drive time needed to switch the readiness code from incomplete to complete.
  • The readiness code will not switch to complete until all the enable criteria are met.
  • If a fault in the secondary HO2S system caused the MIL to come on, the readiness code cannot be set to complete until you correct the fault.
scientia non olet · About LEMON Manuals