LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2015 >> Pilot Touring, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Parking & Back-Up Sensor System) >> Back-Up Sensor Replacement

Back-Up Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION ).
  2. Disconnect the 6P connector (A) from the back-up sensor (B).
    Fig 1: Identifying Back-Up Sensor & 6P Connector
    G05966621Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the retainer (C) and remove the back-up sensor.
  4. Install the sensor in the reverse order of removal.
scientia non olet · About LEMON Manuals