Vanity Mirror Light Test/Replacement
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the sunvisor (see SUNVISOR REMOVAL/INSTALLATION ).
- Disconnect the 2P connector (A) from the sunvisor (B).
Vanity Mirror Light: 1.1 W x 2
- Check for continuity between terminals No. 1 and No. 2.
- With the vanity mirror cover (C) open, there should be continuity.
- With the vanity mirror cover closed, there should be no continuity.
- If the continuity is not as specified, check the bulbs (D). If the bulbs are OK, replace the vanity mirror light.
- Install the parts in the reverse order of removal.