Ambient Light Test/Replacement: Console
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the center pocket (see CENTER POCKET REMOVAL/INSTALLATION ).
- Disconnect the 2P connector (A) from the ambient light (B).
- Remove the ambient light.
- At the ambient light 2P connector, check the light by connecting battery power to the terminal No. 2 and ground to terminal No. 1. The ambient light should come on. If the light does not come on, replace the ambient light.
- Install the light in the reverse order of removal.