Horn Test/Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Disconnect the 1P connector (A) from each horn (B).

Fig 1: Identifying Horn 1P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the horn by monitarily connecting battery power to the terminal (A) and grounding the bracket (B). The horn should sound.

Fig 2: Identifying Grounding Bracket And Terminal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If it fails to sound, replace it.