Corner Parking Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front inner fender (see FRONT INNER FENDER REPLACEMENT ) or the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION ).
Disconnect the 6P connector (A) from the corner parking sensor (B).

Fig 1: Identifying Corner Parking Sensor & 6P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the retainer (C) and remove the sensor.
Install the sensor in the reverse order of removal.