LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2015 >> Pilot LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Navigation System) >> DTC Troubleshooting >> DTC 2610: DRAM Diag

DTC 2610: DRAM Diag

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Check the vehicle battery condition first.
  • Check any official Honda service website for more service information about the navigation system.
  • Before you troubleshoot, make sure to follow GENERAL TROUBLESHOOTING INFORMATION  .
  1. Clear the hard error code (see HOW TO CLEAR ERROR HISTORY  ).
  2. Turn the ignition switch to LOCK (0), then back to ON (II).
  3. Go into the Diagnostic Menu and select the Self-Diagnosis Mode in the Select Diagnosis Items menu (see SYSTEM DIAGNOSTIC MODE  ).
  4. Select the System Links, then select the ECU Info.

    Is DRAM OK indicated? 

    YES  - Intermittent failure, the system is OK at this time. ■

    NO  - Replace the navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION  ). ■