LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2015 >> Pilot LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (VSA (Vehicle Stability Assist) System Components) >> VSA Off Switch Test

VSA Off Switch Test

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to LOCK (0).
  2. Remove the driver's dashboard side lid (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  3. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  4. Push out the VSA OFF switch (A) from the driver's dashboard lower cover.
    Fig 1: Identifying VSA OFF Switch
    G05963001Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Check for continuity between VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the switch is pressed, and no continuity when the switch is released.
    6. Fig 2: Checking Continuity Between VSA OFF Switch 5P Connector Terminals No. 1 & No. 2
    G05963002Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Check for continuity between VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.
    7. Fig 3: Checking Continuity Between VSA OFF Switch 5P Connector Terminals No. 4 & No. 5
    G05963003Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Install the VSA OFF switch in the reverse order of removal.
scientia non olet · About LEMON Manuals