LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2015 >> Pilot EX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Lubrication) >> Oil Filter Feed Pipe Replacement

Oil Filter Feed Pipe Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT ).
  2. Remove the oil filter feed pipe.
    Fig 1: Identifying Oil Filter Feed Pipe
    G05964240Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
    Fig 2: Identifying Nuts
    G05964241Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Apply new engine oil to the oil filter feed pipe threads, then torque the oil filter feed pipe to 35 N.m (3.6 kgf.m, 26 lbf.ft), then remove the nuts from the oil filter feed pipe.
  5. Install the oil filter (see ENGINE OIL FILTER REPLACEMENT ).
scientia non olet · About LEMON Manuals