DTC 1201: DVD High Temp
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow GENERAL TROUBLESHOOTING INFORMATION .
- This code sets when the internal temperature of the ECU rises above 158°F (70°C). The unit is designed to shut down to protect the navigation unit ECU. This could be caused by an inoperative ECU fan or if the vehicle cabin temperature exceeds the maximum. Do the troubleshooting when the navigation unit is within the allowable temperature range.
- Check that the temperature is below 158°F (70°C) in the vehicle cabin.
- Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
- Turn the ignition switch to LOCK (0), and then back to ON (II).
- Check for the hard error code (see HOW TO CHECK ERROR HISTORY
).
Is DTC 1201 indicated?
YES - Replace the navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION ). ■
NO - Intermittent failure, the system is OK at this time. If the unit repeatedly comes back with the DTC, replace the navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION ). ■