LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2015 >> Pilot EX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Intake Air System) >> Air Cleaner Removal/Installation

Air Cleaner Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the MAF sensor/IAT sensor connector (A).
    Fig 1: MAF Sensor/IAT Sensor Connector, Harness Clamp, Bolts, Band & Air Cleaner With Torque Specifications
    G05961471Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the harness clamps (B) and the bolts (C).
  3. Loosen the band (D), then remove the air cleaner (E).
  4. Install the parts in the reverse order of removal.
    NOTE: When tightening the screw of the hose band (F), align the edge of the hose band (G) within the range of the marks (H) painted on the hose band.
scientia non olet · About LEMON Manuals