Glove Box Light Test/Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.

Remove the glove box (see DASHBOARD CENTER LOWER COVER DISASSEMBLY/REASSEMBLY ).
Disconnect the 2P connector (A) from the glove box light (B).
Glove Box Light: 3.4 W

Fig 1: Identifying Glove Box Light 2P Connector Terminals With Button And Bulb
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between terminals No. 1 and No. 2.
- With the button (C) released, there should be continuity.
- With the button (C) pressed, there should be no continuity.
If the continuity is not as specified, check the bulb (D). If the bulb is OK, replace the light.
Install the light in the reverse order of removal.