LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2015 >> Pilot EX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Gauges) >> Select/Reset Switch Test/Replacement

Select/Reset Switch Test/Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  2. Carefully push out the select/reset switch (A) from behind the instrument panel, and disconnect the connector from it.
    Fig 1: Identifying Select/Reset Switch And Instrument Panel
    G05968848Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Terminal Continuity Reference Chart
    G05968849Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the continuity is not as specified, replace the illumination bulb (B) or the switch.
  5. Install the switch in the reverse order of removal.
scientia non olet · About LEMON Manuals