DTC B1155: Gauge Control Module Lost Communication With Combination Switch Control Unit (Headlight Switch Message); DTC B1156: Gauge Control Module Lost Communication With Combination Switch Control Unit (Wiper Switch Message)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Wait for 6 seconds or more.
- Check for DTCs with the HDS.
Are DTCs B1155 and/or B1156 indicated?
YES -Go to step 5.
NO -Intermittent failure, the system is OK at this time. Check for loose or poor connections. ■
- Check for DTCs with the HDS.
Are DTCs B1007, B1062, and B1063 also indicated?
YES -Do the combination switch control unit input test (see COMBINATION SWITCH CONTROL UNIT INPUT TEST ). ■
NO -Do the gauge control module input test (see GAUGE CONTROL MODULE INPUT TEST ). ■