Window Antenna Repair

NOTE: To make an effective repair, the broken section must not be longer than one inch.

Lightly rub the area around the broken section (A) with fine steel wool, then clean it with alcohol.

Fig 1: Identifying Window Antenna Wire, Cellophane Tape And Broken Section
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Carefully mask above and below the broken portion of the window antenna wire (B) with cellophane tape (C).
Using a commercially available rear window defogger repair kit, apply a heavy coat of paint (A) extending about 1/8" on both sides of the break. Allow 30 minutes to dry.

Fig 2: Identifying Paint On Sides Of Break
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity in the repaired wire.
Apply a second coat of paint in the same way. Let it dry 3 hours before removing the tape.