DTC B1002: MICU Internal Error (EEPROM Error)
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Check for DTCs with the HDS.
Is DTC B1002 indicated?
YES -Faulty MICU, replace the under-dash fuse/relay box (see REMOVAL AND INSTALLATION ).
NO -Intermittent failure, the system is OK at this time.