VSA Sensor Neutral Position Memorization: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Honda Odyssey, 2024 Honda Odyssey, 2023 Honda Odyssey, 2022 Honda Odyssey, and 2021 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The VSA sensor neutral position must be learned whenever you do any of these actions:
1. -
  Updating or replacing the VSA modulator-control unit.
2. -
  Updating or replacing the SRS unit.
3. -
  Removing the steering wheel.
4. -
  Removing the steering angle sensor.
5. -
  Disconnecting the steering joint.
6. -
  Wheel alignment adjustment.
Before doing the memorization procedure, park the vehicle on a flat and level surface.

HDS - Connect

VSA Sensor Neutral Position - Memorize

NOTE: Do not press the brake pedal during this procedure.

1. Set the steering wheel in the straight ahead position.

2. Select the ADJUSTMENT from the ABS/TCS/VSA menu with the HDS, then select ALL SENSOR, and follow the screen prompts.