Water Passage Replacement
- Drain the engine coolant (see COOLANT REPLACEMENT
).
- Remove the intake manifold (see
REMOVAL
).
- Remove the EGR pipe (see
EGR PIPE REMOVAL/INSTALLATION
).
- Disconnect the EGR valve connector, the ECT sensor 1 connector, the upper radiator hose, the lower radiator hose, the heater hoses, and the water bypass hoses from the water passage.
- Remove the water passage and related parts.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the water passage in the reverse order of the removal.
- Install the EGR pipe (see
EGR PIPE REMOVAL/INSTALLATION
).
- Install the intake manifold (see
INSTALLATION
).
- Refill the radiator with engine coolant, and bleed the air from the cooling system (see COOLANT CHECK
).
- Clean up any spilled engine coolant.