Audio disc does not eject
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST ).
- Check the connectors for poor connections or loose terminals.
- Disc labels should not be used in the audio unit. They may jam and damage the player mechanism.
- Make sure the audio disc is compatible with the system (see the Owner's Manual for more information).
- Turn the ignition switch to ON (II).
- Turn on the audio unit.
Does the system turn on?
YES -Go to step 3.
NO -Go to Audio unit power switch will not turn on (No information display and no sound) troubleshooting (see AUDIO UNIT POWER SWITCH WILL NOT TURN ON (NO INFORMATION DISPLAY AND NO SOUND) ). ■
- Check to see if the disc ejects correctly with no binding when you push the EJECT button.
Does the disc eject properly?
YES -Operation is normal. ■
NO -
- With navigation: Substitute a known-good audio disc changer (see AUDIO DISC CHANGER REMOVAL/INSTALLATION ) and recheck. If the symptom/indication goes away, replace the audio disc changer (see AUDIO DISC CHANGER REMOVAL/INSTALLATION ). ■
- Without navigation: Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ). ■