Oil Seal Replacement

Special Tools Required 

• Driver Handle, 15 x 135L 07749-0010000
• Oil Seal Driver Attachment, 65 mm 07JAD-SH3010A

1. Remove the oil seal from the torque converter housing.
   Fig 1: Removing Oil Seal From Torque Converter Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new oil seal flush to the torque converter housing using the driver handle and the 65 mm attachment.
   Fig 2: Installing Oil Seal Flush To Torque Converter Housing Using Driver Handle

   Courtesy of AMERICAN HONDA MOTOR CO., INC.