VTM-4 LOCK Switch Test/Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
Disconnect the 5P connector (A) from the VTM-4 LOCK switch (B), then remove the VTM-4 LOCK switch.

Fig 1: Identifying 5P Connector And VTM-4 LOCK Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 2: Terminals Switch Position Continuity Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity check is not as specified, replace the bulbs (C) or the VTM-4 LOCK switch.