LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Pilot EX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Rear Differential) >> Rear Differential Fluid Temperature Sensor Replacement

Rear Differential Fluid Temperature Sensor Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the differential fluid. Reinstall the drain plug with a new sealing washer (see REAR DIFFERENTIAL FLUID INSPECTION AND REPLACEMENT ).
  2. Remove the wire harness cover (A), then disconnect the differential fluid temperature sensor 2P connector (B).
    Fig 1: Wire Harness Cover And Differential Fluid Temperature Sensor 2P Connector With Torque Specifications
    G05964896Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the differential fluid temperature sensor (C).
  4. Install the differential fluid temperature sensor in the reverse order of removal, with a new O-ring (D).
  5. Refill the differential with the recommended differential fluid (see REAR DIFFERENTIAL FLUID INSPECTION AND REPLACEMENT ).
scientia non olet · About LEMON Manuals