Immobilizer Indicator Does Not Go Off
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to LOCK (0).
- Connect the HDS to the data link connector.
- Turn the ignition switch to ON (II).
- From the SYSTEM SELECTION MENU, enter IMMOBI, then select IMMOBILIZER SETUP, then select SYSTEM CHECK, Number of Keys, and Status Log.
- Do the SYSTEM CHECK with the HDS.
Is N-1 OK indicated?
YES - Do the gauge control module self-diagnostic function test (see SELF-DIAGNOSTIC FUNCTION ). If the gauge control module is faulty, replace it. ■
NO - Substitute a known-good immobilizer-keyless control unit, then register it and recheck. If the symptom goes away, replace the original immobilizer-keyless control unit (see IMMOBILIZER-KEYLESS CONTROL UNIT REPLACEMENT ). ■