Front Rocker Arm Oil Pressure Switch Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine cover (see step 1 on IGNITION COIL REMOVAL/INSTALLATION ).
Disconnect the front rocker arm oil pressure switch 1P connector (A).

Fig 1: Oil Pressure Switch 1P Connector & Front Rocker Arm Oil Pressure Switch With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the front rocker arm oil pressure switch (B).
Install the parts in the reverse order of removal with a new O-ring (C).