LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Pilot EX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Under-Hood Fuse/Relay Box) >> Under-Hood Fuse/Relay Box >> Removal

Under-Hood Fuse/Relay Box: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
  2. Open the cover (A), then remove the screws (B) for the alternator and battery cable terminals from the under-hood fuse/relay box.
    Fig 1: Identifying Cover, Screws And Mounting Bolt
    G05968623Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the mounting bolt (C) from the under-hood fuse/relay box.
  4. Remove the bottom cover from the under-hood fuse/relay box.
  5. Disconnect the connectors from the under-hood fuse/relay box.
  6. If replacing the fuse/relay box, carefully remove the relays by using the relay puller.
    NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.
scientia non olet · About LEMON Manuals