Side Engine Mount Removal and Installation: Installation

Install the side engine mount (A) and the wire harness bracket (B).

Fig 1: Side Engine Mount And Wire Harness Bracket With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Loosely install the upper half of the side engine mount bracket (A) using new bolts, then install the ground cable bracket (B).

Fig 2: Side Engine Mount Bracket And Ground Cable Bracket With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the jack and the wood block.
Tighten the mounting bolts in the numbered sequence shown.
Install the PCM bracket (A), the harness clamps (B), and the engine wire harness connector (C).

Fig 3: PCM Bracket, Clamps And Engine Wire Harness Connector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the A/C suction line mounting bracket bolt (D), and the front receiver line (E) to the clip (F).
Install the PCM (see PCM REPLACEMENT ).