Rearview Camera Removal/Installation

Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
Disconnect the rearview camera 12P connector and the license plate light sub harness 4P connector (A).

Fig 1: Identifying License Plate Light Sub Harness 4P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the rear license trim, (see REAR LICENSE TRIM REPLACEMENT )
Remove the connectors and detach the harness clip (A) from the rear license trim.

Fig 2: Identifying Rearview Camera And Harness Clip
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws and rearview camera (B).
Install the rearview camera in the reverse order of removal.