LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Pilot EX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Audio System) >> System Description >> XM Receiver Connector A (14P)

XM Receiver Connector A (14P)

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
WIRE COLOR REFERENCE TABLE

Cavity Wire Color Connect to
A1 RED Audio unit (+B)
A2 RED Audio unit (SYS ACC)
A3 BRIM(1) Shield for terminals No. 9 and No. 10 (GA-NET BUS SH)
A5 WHT Audio unit, USB adapter unit(2) (AUDIO R+)
A6 RED Audio unit, USB adapter unit(2) (AUDIO L+)
A9 BLK Audio unit, navigation display unit(2), and USB adapter unit(2) (GA-NET BUS +)
A10 WHT Audio unit, navigation display unit(2), and USB adapter unit(2) (GA-NET BUS-)
A11 GRY Audio unit (GND)
A13 BLK Audio unit, USB adapter unit (2) (AUDIO R-)
A14 GRN Audio unit, USB adapter unit (2) (AUDIO L-)
(1) The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.

(2) With navigation
Fig 1: Identifying XM Receiver Connector Terminals A (14P)
G05966830Courtesy of AMERICAN HONDA MOTOR CO., INC.