LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Pilot EX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Audio System) >> System Description >> USB Adapter Unit Connector A (14P)

USB Adapter Unit Connector A (14P)

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
WIRE COLOR REFERENCE TABLE

Cavity Wire Color Connect to
A1 RED Audio unit (+B)
A2 RED Audio unit (SYS ACC)
A3 BRN(1) Shield for terminals No. 9 and No. 10 (GA-NET BUS SH)
A4 GRY(1) Shield for terminals No. 5, No. 6, No. 13 and No. 14 (AUDIO SH)
A5 WHT Audio unit, XM receiver (AUDIO R+)
A6 RED Audio unit, XM receiver (AUDIO L+)
A9 BLK Audio unit, XM receiver, and navigation display unit (GA-NET BUS+)
A10 WHT Audio unit, XM receiver, and navigation display unit (GA-NET BUS-)
A11 GRY Audio unit (GND)
A13 BLK Audio unit, XM receiver (AUDIO R-)
A14 GRN Audio unit, XM receiver (AUDIO L-)
(1) The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.
Fig 1: Identifying USB Adapter Unit Connector Terminals A (14P)
G05966833Courtesy of AMERICAN HONDA MOTOR CO., INC.