Audio disc does not eject

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Check the vehicle battery condition first (see 12 VOLT BATTERY TEST ).
Check the connectors for poor connections or loose terminals.
Disc labels should not be used in the audio-navigation unit or the audio unit. They may damage the player mechanism.

Turn the ignition switch to ON (II).
Turn on the audio system.
Does the system turn on?

YES -go to step 3.

NO -Go to audio unit power switch will not turn on.
- With navigation (see AUDIO-NAVIGATION UNIT POWER SWITCH WILL NOT TURN ON (NO INFORMATION DISPLAY AND NO SOUND) (WITH NAVIGATION) ).
- Without navigation (see AUDIO UNIT POWER SWITCH WILL NOT TURN ON (NO INFORMATION DISPLAY AND NO SOUND) (WITHOUT NAVIGATION) ).
Check to see if the disc ejects correctly with no binding by pushing the EJECT button.
Does the disc eject normally?

YES -Operation is normal.

NO -
- With navigation: Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
- Without navigation: Replace the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).