Passenger's Power Window Switch Test

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Remove the grip cover:
- Front passenger's (see FRONT DOOR PANEL REMOVAL/INSTALLATION )
- Rear (see REAR DOOR PANEL REMOVAL/INSTALLATION )
Disconnect the 5P connector (A) from the passenger's window switch.
Front passenger's

Fig 1: Identifying Front Passenger's Window Switch 5P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear

Fig 2: Identifying Rear Passenger's Window Switch 5P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table below.

Fig 3: Identifying Switch Position Continuity Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, replace switch (see POWER WINDOW MASTER SWITCH REPLACEMENT ).