Passenger's Power Window Switch Replacement

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The graphic shows front passenger's power window switch.

Remove the door panel:
- Front passenger's (see FRONT DOOR PANEL REMOVAL/INSTALLATION )
- Rear (see REAR DOOR PANEL REMOVAL/INSTALLATION )
Remove the screws and the grip base (A).

Fig 1: Identifying Grip Base & Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Open the switch panel (A) from the grip base.

Fig 2: Identifying Switch Panel & Grip Base
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws and replace the passenger's power window switch (B).
Install the parts in the reverse order of removal.