LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (VTEC) >> Rocker Arm Oil Control Valve Removal/Installation

Rocker Arm Oil Control Valve Removal/Installation

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the harness holder (A).
    Fig 1: Identifying Harness Holder
    G05953097Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Disconnect the rocker arm oil control solenoid connector (A) and the rocker arm oil pressure switch connector (B).
    Fig 2: Identifying Rocker Arm Oil Control Solenoid Connector & Rocker Arm Oil Pressure Switch Connector
    G05953098Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the rocker arm oil control valve assembly (C) and the rocker arm oil control valve filter (D).
  4. Install the parts in the reverse order of removal with a new rocker arm oil control valve filter.
scientia non olet · About LEMON Manuals