LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (Security System & Keyless Entry System - Testing & Troubleshooting) >> General Information >> Keyless Access System Symptom Troubleshooting Information >> Symptom Troubleshooting Using the Immobilizer Indicator Lighting Pattern >> Immobilizer code is not identified:

Immobilizer code is not identified:

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Honda Fit, 2019 Honda Fit, 2018 Honda Fit, 2017 Honda Fit, and 2016 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

When the vehicle is turned to the ON mode when the immobilizer code has not been identified, the immobilizer indicator will come on for 2 seconds, then blink until the OFF mode is selected. The state of keyless registration and the S-NET line can be checked by doing a system check and a status log check with the HDS.

When the vehicle is turned to the OFF (LOCK) mode, the immobilizer indicator will blink 10 times to signal that until it has been reset correctly, the immobilizer indicator will remain off.