Torque Specifications

NOTE:

Refer to the appropriate portion of the manual for the precautions and complete procedures.
Refer to the appropriate portion of the manual for the bolts/nuts not indicated here.

ENGINE ELECTRICAL TORQUE SPECIFICATIONS

Location	Item	Torque
Starting system	Starter bolt (10 mm)	45 N.m (4.6 kgf.m, 33 lbf.ft)
	Starter bolt (12 mm)	64 N.m (6.5 kgf.m, 47 lbf.ft)
	Starter harness clamp nut	9 N.m (0.9 kgf.m, 7 lbf.ft)
Ignition system	Spark plugs	18 N.m (1.8 kgf.m, 13 lbf.ft)
Charging system	Alternator bolts	22 N.m (2.2 kgf.m, 16 lbf.ft)
	Drive belt auto-tensioner bolts	22 N.m (2.2 kgf.m, 16 lbf.ft)
	Drive belt auto-tensioner pulley bolt	56 N.m (5.7 kgf.m, 41 lbf.ft)
	Idler pulley bolt	45 N.m (4.6 kgf.m, 33 lbf.ft)

ENGINE MECHANICAL TORQUE SPECIFICATIONS

Location

Item

Remark

Torque

Engine assembly

Side engine mount bolts

64 N.m (6.5 kgf.m, 47 lbf.ft)

Side engine mount bracket bolt

Use new bolt

74 N.m (7.5 kgf.m, 55 lbf.ft)

Side engine mount bracket nut

Use new nut

74 N.m (7.5 kgf.m, 55 lbf.ft)

Upper torque rod bolts ⁽²⁾

Use new bolts

74 N.m (7.5 kgf.m, 55 lbf.ft)

Upper torque rod bolt ⁽²⁾

Use new bolts

54 N.m (5.5 kgf.m, 40 lbf.ft)

Lower torque rod bolts (12 mm) ⁽²⁾

Use new bolts

88 N.m (7.5 kgf.m, 55 lbf.ft)

Lower torque rod bolt (14 mm) ⁽²⁾

Use new bolt

93 N.m (9.5 kgf.m, 67 lbf.ft)

Lower torque rod bracket bolts

Use new bolts

74 N.m (7.5 kgf.m, 55 lbf.ft)

Front engine mount bolts

Use new bolts

74 N.m (7.5 kgf.m, 55 lbf.ft)

Front engine mount bolt

Use new bolt

64 N.m (6.5 kgf.m, 47 lbf.ft)

Transmission mount bolts

Use new bolts

59 N.m (6.0 kgf.m, 44 lbf.ft)

Transmission mount bolt

Use new bolt

88 N.m (9.0 kgf.m, 65 lbf.ft)

Transmission mount bracket bolt

Use new bolt

74 N.m (7.5 kgf.m, 55 lbf.ft)

Transmission mount bracket nuts

Use new nuts

74 N.m (7.5 kgf.m, 55 lbf.ft)

Engine lubrication

Oil pressure switch

Apply liquid gasket on threads

18 N.m (1.8 kgf.m, 13 lbf.ft)

Oil pan drain bolt

Use new washer

39 N.m (4.0 kgf.m, 29 lbf.ft)

Oil filter

12 N.m (1.2 kgf.m, 9 lbf.ft)

Intake manifold and exhaust system

Intake manifold bolts ⁽¹⁾

22 N.m (2.2 kgf.m, 16 lbf.ft)

Intake manifold nuts ⁽¹⁾

22 N.m (2.2 kgf.m, 16 lbf.ft)

Muffler flexible joint bolts ⁽¹⁾

22 N.m (2.2 kgf.m, 16 lbf.ft)

Exhaust pipe B self-locking nuts

Use new nuts

33 N.m (3.4 kgf.m, 25 lbf.ft)

⁽¹⁾	Parts to be tightened in a particular order.

⁽²⁾	Follow the appropriate manual procedures closely for torque, sequence, and special steps.

ENGINE COOLING TORQUE SPECIFICATIONS

Location	Item	Torque
Cooling system	Water passage bolts	45 N.m (4.6 kgf.m, 33 lbf.ft)
	Water passage nuts	45 N.m (4.6 kgf.m, 33 lbf.ft)
	Water outlet bolts	22 N.m (2.2 kgf.m, 16 lbf.ft)
	Water outlet nuts	22 N.m (2.2 kgf.m, 16 lbf.ft)

FUEL AND EMISSIONS TORQUE SPECIFICATIONS

Location

Item

Remark

Torque

Fuel and emissions

A/F sensor

44 N.m (4.5 kgf.m, 33 lbf.ft)

Fuel tank locknut ⁽¹⁾

Use new locknut, locknut plate, and base gasket

100 N.m (10.2 kgf.m, 73.8 lbf.ft)

Fuel tank support straps bolts 38

N.m (3.9 kgf.m, 28 lbf.ft)

Knock sensor

22 N.m (2.2 kgf.m, 16 lbf.ft)

PCV valve

Use new washer

45 N.m (4.6 kgf.m, 33 lbf.ft)

Rocker arm oil pressure switch

Use new O-ring

22 N.m (2.2 kgf.m, 16 lbf.ft)

Secondary HO2S

44 N.m (4.5 kgf.m, 33 lbf.ft)

Throttle body bolts

Use new gasket

22 N.m (2.2 kgf.m, 16 lbf.ft)

TWC bracket bolts

45 N.m (4.6 kgf.m, 33 lbf.ft)

TWC upper bolts and nuts

Use new gaskets

31 N.m (3.2 kgf.m, 23 lbf.ft)

TWC self locking nuts

Use new gaskets and nuts

33 N.m (3.4 kgf.m, 25 lbf.ft)

*1: Parts to be tightened in a particular order.

⁽¹⁾	Follow the appropriate manual procedures closely for torque, sequence, and special steps.

AUTOMATIC TRANSMISSION TORQUE SPECIFICATIONS

Location	Item	Remark	Torque
Automatic transmission	ATF drain plug	Use new sealing washer	49 N.m (5.0 kgf.m, 36 lbf.ft)
	Clutch pressure inspection hole sealing bolts	Use new sealing washers	18 N.m (1.8 kgf.m, 13 lbf.ft)
	Drive plate bolts ⁽⁾		74 N.m (7.5 kgf.m, 55 lbf.ft)
	Shift cable end nut		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Shift lever assembly bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Shift lever bracket base nut		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Shift lever bracket base bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Transfer assembly bolts		44 N.m (4.5 kgf.m, 32 lbf.ft)
	Transmission fluid pressure switches	Use new sealing washer	20 N.m (2.0 kgf.m, 15 lbf.ft)
	Transmission assembly mounting bolts (10mm)		44 N.m (4.5 kgf.m, 33 lbf.ft)
	Transmission assembly mounting bolts (12mm)		64 N.m (6.5 kgf.m, 47 lbf.ft)

REAR DIFFERENTIAL TORQUE SPECIFICATIONS

Location

Item

Remark

Torque

Rear differential

Filler plug

Use new sealing washer

47 N.m (4.8 kgf.m, 35 lbf.ft)

Drain plug

Use new sealing washer

47 N.m (4.8 kgf.m, 35 lbf.ft)

Rear differential mount rubber bolts

31 N.m (3.2 kgf.m, 23 lbf.ft)

Right and left rear differential mount brackets B bolt (10 mm)

Use new bolt
Use new washer

64 N.m (6.5 kgf.m, 47 lbf.ft)

Right and left rear differential mount brackets B bolts (12 mm)

Use new bolts

59 N.m (6.0 kgf.m, 44 lbf.ft)

Rear differential mount assembly A bolts (10 mm)

44 N.m (4.5 kgf.m, 32 lbf.ft)

Rear differential mount assembly A bolts (12 mm)

Use new bolts

59 N.m (6.0 kgf.m, 44 lbf.ft)

*1: Parts to be tightened in a particular order.

⁽¹⁾	Follow the appropriate manual procedures closely for torque, sequence, and special steps.

DRIVELINE/AXLE TORQUE SPECIFICATIONS

Location	Item	Remark	Torque
Driveline/axle	Front driveshaft spindle nut	Use oil on the seating surface Use new nut	328 N.m (33.5 kgf.m, 242 lbf.ft)
	Rear driveshaft spindle nut	Use oil on the seating surface Use new nut	181 N.m (18.5 kgf.m, 133 lbf.ft)
	Intermediate shaft dowel bolts		39 N.m (4.0 kgf.m, 29 lbf.ft)
	Intermediate shaft flange bolt		39 N.m (4.0 kgf.m, 29 lbf.ft)
	No. 1 propeller shaft bolts	Use new bolts	32 N.m (3.3 kgf.m, 24 lbf.ft)
	No. 2 propeller shaft bolts	Use new bolts	32 N.m (3.3 kgf.m, 24 lbf.ft)
	Center support bearing bolts	Use new bolts	39 N.m (4.0 kgf.m, 29 lbf.ft)
	No. 1 propeller shaft protector bolts	Use new bolts	22 N.m (2.2 kgf.m, 16 lbf.ft)
	No. 2 propeller shaft protector bolts	Use new bolts	22 N.m (2.2 kgf.m, 16 lbf.ft)

STEERING TORQUE SPECIFICATIONS

Location	Item	Remark	Torque value
Steering	Steering wheel nut		39 N.m (4.0 kgf.m, 29 lbf.ft)
	Steering joint bolts		29 N.m (3.0 kgf.m, 21 lbf.ft)
	Steering column bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Steering column nuts		13 N.m (1.3 kgf.m, 10 lbf.ft)
	Steering gearbox bolts	Use new bolts	87 N.m (8.9 kgf.m, 64 lbf.ft)
	Steering gearbox stiffener bolts	Use new bolts	29 N.m (3.0 kgf.m, 21 lbf.ft)
	Tie-rod end nuts		54 N.m (5.5 kgf.m, 40 lbf.ft)
	Tie-rod end lock nuts		44 N.m (4.5 kgf.m, 32 lbf.ft)

SUSPENSION TORQUE SPECIFICATIONS

Location	Item	Remark	Torque
Front suspension	Wheel nuts		108 N.m (11.0 kgf.m, 80 lbf.ft)
	Knuckle damper pinch bolts/nuts	Use new bolts/nuts	157 N.m (16.0 kgf.m, 116 lbf.ft)
	Lower ball joint nuts	Use new nuts	52 N.m (5.3 kgf.m, 38 lbf.ft)
	Lower ball joint bolt	Use new bolt	52 N.m (5.3 kgf.m, 38 lbf.ft)
	Lower ball joint castle nut	Use new nut	59-69 N.m (6.0-7.0 kgf.m, 44-51 lbf.ft)
	Lower arm bolt (12mm)	Use new bolt	59 N.m (6.0 kgf.m, 44 lbf.ft)
	Lower arm bolt (14mm)	Use new bolt	113 N.m (11.5 kgf.m, 83 lbf.ft)
	Stabilizer bar bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Stabilizer link nut		78 N.m (8.0 kgf.m, 58 lbf.ft)
	Stabilizer link nut	Use new nut	78 N.m (8.0 kgf.m, 58 lbf.ft)
	Damper self-locking nut	Use new nut	44 N.m (4.5 kgf.m, 32 lbf.ft)
	Damper upper nuts	Use new nuts	44 N.m (4.5 kgf.m, 32 lbf.ft)
Rear suspension	Wheel nuts		108 N.m (11.0 kgf.m, 80 lbf.ft)
	Knuckle bolt (14mm)	Use new bolt	69 N.m (7.0 kgf.m, 51 lbf.ft)
	Knuckle nut (12mm)	Use new nut	57 N.m (5.8 kgf.m, 42 lbf.ft)
	Upper arm bolts (12mm)	Use new bolts	93 N.m (9.5 kgf.m, 44 lbf.ft)
	Trailing arm front bolts	Use new bolts	74 N.m (7.5 kgf.m, 54 lbf.ft)
	Trailing arm rear bolt	Use new bolt	59 N.m (6.0 kgf.m, 44 lbf.ft)
	Stabilizer bar bolts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Stabilizer link self-locking nut	Use new nut	38 N.m (3.9 kgf.m, 28 lbf.ft)
	Stabilizer link nut	Use new nut	38 N.m (3.9 kgf.m, 28 lbf.ft)
	Damper lower bolt	Use new bolt	93 N.m (9.5 kgf.m, 69 lbf.ft)
	Damper upper nut	Use new nut	74 N.m (7.5 kgf.m, 54 lbf.ft)
	Damper self-locking nut	Use new nut	29 N.m (3.0 kgf.m, 22 lbf.ft)

BRAKE TORQUE SPECIFICATIONS

Location	Item	Remark	Torque
Conventional brake	Front brake caliper bolts 8mm (2WD)		34 N.m (3.5 kgf.m, 25 lbf.ft)
	Front brake caliper bolts 10mm (AWD)		50 N.m (5.1 kgf.m, 37 lbf.ft)
	Front brake caliper bracket bolts		137 N.m (14.0 kgf.m, 101 lbf.ft)
	Front brake hose banjo bolt	Use new washers	35 N.m (3.6 kgf.m, 26 lbf.ft)
	Rear brake caliper bolts		23 N.m (2.3 kgf.m, 17 lbf.ft)
	Rear brake caliper bracket bolts		108 N.m (11.0 kgf.m, 80 lbf.ft)
	Rear brake hose banjo bolt		Use new washers 35 N.m (3.6 kgf.m, 26 lbf.ft)
	Parking brake pedal bolt		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Parking brake pedal nuts		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Brake pedal bolt		22 N.m (2.2 kgf.m, 16 lbf.ft)
	Brake booster/brake pedal nuts		12 N.m (1.2 kgf.m, 9 lbf.ft)
	Master cylinder nuts		15 N.m (1.5 kgf.m, 11 lbf.ft)
	Master cylinder brake line		22 N.m (2.2 kgf.m, 16 lbf.ft)
VSA	VSA modulator-control unit brake line (10 mm)		15 N.m (1.5 kgf.m, 11 lbf.ft)
VSA	VSA modulator-control unit brake line (12 mm)		22 N.m (2.2 kgf.m, 16 lbf.ft)

BODY TORQUE SPECIFICATIONS

Location	Item	Remark	Torque
Frame	Front subframe mid bolts	Use new bolts	71 N.m (7.2 kgf.m, 52 lbf.ft)
	Front subframe bolts	Use new bolts	103 N.m (10.5 kgf.m, 75.9 lbf.ft)
	Rear subframe bolts	Use new bolts	69 N.m (7.0 kgf.m, 51 lbf.ft)
	Rear subframe stiffener bolt		29 N.m (3.0 kgf.m, 21 lbf.ft)

HEATING, VENTILATION, AND AIR CONDITIONING TORQUE SPECIFICATIONS

Location	Item	Torque
A/C compressor	A/C compressor bracket bolts	45 N.m (4.6 kgf.m, 33 lbf.ft)
	A/C compressor bolts	22 N.m (2.2 kgf.m, 16 lbf.ft)
	A/C compressor center nut	25.5 N.m (2.6 kgf.m, 19 lbf.ft)
	A/C compressor relief valve	9.8 N.m (1.00 kgf.m, 7.2 lbf.ft)
Receiver line	A/C pressure sensor	11 N.m (1.1 kgf.m, 8 lbf.ft)

BODY ELECTRICAL TORQUE SPECIFICATIONS

Location	Item	Remark	Torque
Wipers/washers	Windshield wiper arm nut		30 N.m (3.0 kgf.m, 22 lbf.ft)
Wipers/washers	Windshield wiper linkage nut		31 N.m (3.2 kgf.m, 23 lbf.ft)