MICU Control Functions Index
WARNING: This page is about a different car, the 2011 Honda CR-V, 2010 Honda CR-V, 2009 Honda CR-V, 2008 Honda CR-V, and 2007 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
The MICU (built into the under-dash fuse/relay box) is one of the B-CAN components. The MICU controls many systems related to the body controller area network, and also works as a gateway to diagnose the other B-CAN circuits with the HDS.
Refer to each system circuit diagram for details.
MICU CONTROL FUNCTIONS INDEX
| System | Function |
|---|---|
| Multiplex Control | Sends the switch input/output signal information to the MICU. The MICU controls the ECUs electric load and communication based upon the information received via the B-CAN. |
| On-Board Diagnosis | The MICU has a gateway function which sends the results of the MICU internal diagnosis and the B-CAN connected ECUs diagnosis to the HDS. |
| Self-Diagnosis | Test mode 1 diagnoses the communication line between the MICU and B-CAN connected unit. Test mode 2 checks the switch inputs connected to the MICU. |
| Interior Light(s) | The MICU controls the interior lights ON, OFF and dimming based upon the information of the related switches and/or the B-CAN related information. |
| Sleep Function | The MICU has a sleep function, which it enters during the power down mode. |
The MICU also controls the function of these circuits:
- Entry lights (map lights and ceiling light)
- Exterior lights (including the daytime running lights)
- Horn
- Interlock system
- Key-in reminder
- Keyless entry
- Lights-on reminder
- Power door locks
- Power window key-off timer
- Seat belt reminder
- Security alarm
- Turn signal/hazard warning lights
- Wiper/washer