Shift Lock Solenoid Test: Test

HDS DLC - Connection
1. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
2. Turn the ignition switch to ON (II).
3. Make sure the HDS communicates with the vehicle. If it does not communicate, go to the DLC circuit troubleshooting.
  
  Fig 1: Identifying Data Link Connector Located Under Driver's Side Of Dashboard
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Shift Lock Solenoid - Test
1. Select the Shift Lock Solenoid Test in the Miscellaneous Test Menu, and check that the shift lock solenoid operates with the HDS.
2. Check that the shift lever can be moved out of P when the Shift Lock Solenoid is ON. Move the shift lever back to P, and check that it locks when the Shift Lock Solenoid is OFF.
3. Check that the shift lock releases when the shift lock release is pushed, and check that it locks when the shift lock release is released.
4. If the shift lock solenoid does not work properly, troubleshoot the shift lock system circuit.