Steering Angle Sensor Neutral Position Clear: Procedure
- HDS DLC - Connection
- Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
- Turn the ignition switch to ON (II).
- Make sure the HDS communicates with the vehicle. If it does not communicate, go to the DLC circuit troubleshooting.
- Steering Angle Sensor Neutral Position - Clear
- Select EPS ADJUSTMENT, then select EPS STEERING ANGLE SENSOR VALUE CLEAR and follow the screen prompts on the HDS.NOTE: See the HDS Help menu for specific instructions.
- Select EPS ADJUSTMENT, then select EPS STEERING ANGLE SENSOR VALUE CLEAR and follow the screen prompts on the HDS.