LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> CR-V EX, 2.4L Eng, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA System DTC Testing >> VSA Sensor Neutral Position Memorization >> Procedure

VSA Sensor Neutral Position Memorization: Procedure

  1. HDS DLC - Connection
    1. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
    2. Turn the ignition switch to ON (II).
    3. Make sure the HDS communicates with the vehicle. If it does not communicate, go to the DLC circuit troubleshooting.
      Fig 1: Identifying Data Link Connector
      G08883203Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. VSA Sensor Neutral Position - Memorization
    1. Park the vehicle on a flat and level surface, with the steering wheel in the straight ahead position.
    2. Select VSA ADJUSTMENT, then select ALL SENSORS with the HDS, and follow the screen prompts.
      NOTE: See the HDS Help menu for specific instructions.
  3. Steering Angle Sensor Neutral Position - Clear
    1. Select EPS ADJUSTMENT, then select EPS STEERING ANGLE SENSOR VALUE CLEAR and follow the screen prompts on the HDS.
      NOTE: See the HDS Help menu for specific instructions.
scientia non olet · About LEMON Manuals