DTC U1280: Keyless Access ECU Bus Line Error (Keyless Access Control Unit)
WARNING: This page is about a different variant/trim than selected.
| DTC Description | DTC |
|---|---|
| U1280 KEYLESS ACCESS ECU BUS LINE ERROR |
DTC (Keyless Access Control Unit)
- Problem verification
- 1. Clear the DTCs with the HDS.
- 2. Press the engine start/stop button to select the OFF mode and then the ON mode.
- 3. Wait for at least 6 seconds.
- 4. Check for DTCs with the HDS.
DTC Description DTC U1280 KEYLESS ACCESS ECU BUS LINE ERROR Is DTC U1280 indicated?
YES
Go to MICU DTC U1280 troubleshooting .
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.