Driving Position Memory System Description: Control/Function

WARNING: This page is about a different variant/trim than selected.

Memorizing a Seat Position

Turn the vehicle to the ON mode, and then move the seat to the desired position. Press and hold the SET button of the driver's position memory switch. Beep is heard once and both of the green LEDs begin to flash. Press the No. 1 or No. 2 button to match the remote that is to be used. Then the seat position is memorized and two beeps will be heard. The green LED remains lit, unless moved the seat from the memorized position.

Memorized Position Recall with the Remotes

After the seat position are memorized, the seat move to the memorized position when the appropriate remote UNLOCK button is pressed and the driver's door is opened. When the seat move to the memorized position, the green LED corresponding with that remote stays lit until the position is changed or the vehicle is turned to the OFF (LOCK) mode.