Panic Mode

WARNING: This page is about a different car, the 2011 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Pressing and holding the PANIC button on the keyless transmitter for 2 seconds will activate the panic mode feature. The panic mode command is received by the immobilizer-keyless control unit. The immobilizer-keyless control unit communicates the panic mode command to the control circuit board in the relay control module, driver's MICU, and rear MICU via B-CAN.

According to the request, the control circuit board in the relay control module, driver's MICU, and rear MICU sound the horns and flash the exterior lights for approximately 20 seconds. The panic mode can be cancelled by pressing any button on the keyless transmitter or by turning the ignition switch to the ON (II) position. If the ignition switch is in the ON (II) position, the panic mode cannot be activated.