Wiper Motor Replacement: Installation
- Before installing the motor, connect the 5P connector to the wiper motor, and turn the windshield wiper/washer switch ON to (LO) or (HI) position, then OFF to return the motor shaft to the park position.
NOTE:
- Do not use the windshield wiper/washer switch (INT) position in this step.
- Apply multipurpose grease to the moving parts.
- Install the wiper motor to the wiper linkage assembly in the reverse order of removal.
- Install the linkage to the wiper motor shaft, then align the wiper linkage assembly.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- After installation, adjust the wiper arms (see WINDSHIELD
).