LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> Insight Base >> Repair and Diagnosis >> Engine Performance >> System >> Fuel And Emissions Systems >> How to Set Readiness Codes >> Evaporative Emission (EVAP) Control System Monitor and Readiness Code >> Notes

Evaporative Emission (EVAP) Control System Monitor and Readiness Code: Notes

NOTE: All readiness codes are cleared when the 12 volt battery is disconnected, if DTCs have been cleared, or if the PCM is reset with the HDS.
scientia non olet · About LEMON Manuals