LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Fuel And Emissions Systems >> General Troubleshooting Information >> CKP Pattern Clear/CKP Pattern Learn >> Learn Procedure (without the HDS)

Learn Procedure (without the HDS)

  1. Start the engine. Hold the engine speed at 3, 000 RPM without load (CVT in P or N, M/T in neutral) until the radiator fan comes on.
  2. Test-drive the vehicle on a level road: Decelerate (with the throttle fully closed) from an engine speed of 2, 500 RPM down to 1, 000 RPM, with the CVT in D, or the M/T in 2nd.
  3. Repeat step  2 several times.
  4. Turn the ignition switch to LOCK (0).
  5. Turn the ignition switch to ON (II), and wait 30 seconds.
scientia non olet · About LEMON Manuals