Hood Latch Replacement

NOTE:

Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Remove the clips, then remove the hood latch cover (A).

Fig 1: Identifying Hood Latch Cover And Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
With hood latch switch: Detach the latch switch connector (A) from the connector clip (B), and disconnect it.

Fig 2: Identifying Latch Switch Connector And Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts and the nut, then remove the latch (A) from the body.

Fig 3: Latch Bolts And Nut With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the hood opener cable (A) from the hood latch (B). Take care not to kink the cable.

Fig 4: Identifying Hood Opener Cable And Hood Latch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the latch in the reverse order of removal, and note these items:
- Apply multipurpose grease to the hood latch as indicated by the arrows.
- Make sure the hood opener cable is connected securely and the hood latch switch connector is plugged in properly (with security system).
- Make sure the cable actuates the latch before you close the hood.
- Adjust the hood latch alignment (see step HOOD ADJUSTMENT ).
- Make sure the hood opens properly and locks securely.
Fig 5: Identifying Multipurpose Grease Application Area
Courtesy of AMERICAN HONDA MOTOR CO., INC.