Transfer Hypoid Drive Gear Bearing Replacement

Special Tools Required 

• Driver Handle, 15 x 135L 07749-0010000
• Bearing Driver Attachment, 42 x 47 mm 07746-0010300
• Attachment, 40 x 50 mm 07LAD-PW50601

1. Remove the tapered roller bearing (A) from the transfer hypoid drive gear (B) using the driver handle (15 x 135L), bearing driver attachment (42 x 47 mm), a bearing separator (C) and a press.
   Fig 1: Removing Tapered Roller Bearing From Transfer Hypoid Drive Gear

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new tapered bearing on the transfer hypoid drive gear using the driver handle (15 x 135L), bearing driver attachment (42 x 47 mm), attachment (40 x 50 mm), and the press.

Fig 2: Installing Tapered Bearing On Transfer Hypoid Drive Gear

Courtesy of AMERICAN HONDA MOTOR CO., INC.