LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Differential >> VTM-4 Control Unit Replacement

VTM-4 Control Unit Replacement

NOTE: The VTM-4 control unit must be initialized after replacement, otherwise the 4WD system will not function.
  1. Remove the right side kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
  2. Remove the three bolts (A) from the VTM-4 control unit(B).
    Fig 1: VTM-4 Control Unit And Bolts With Torque Specifications
    G05964899Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the VTM-4 control unit connectors.
  4. Install the VTM-4 control unit in the reverse order of removal.
  5. Do the VTM-4 control unit initialization (see INITIALIZATION OF THE VTM-4 CONTROL UNIT ).
scientia non olet · About LEMON Manuals