In-Bed Trunk Lid Lock Cylinder Replacement

NOTE:

Remove the nuts, then remove the in-bed trunk lid opener from the in-bed trunk lid (see IN-BED TRUNK LID OPENER REPLACEMENT ).
Remove the opener seat from the in-bed trunk lid opener as needed (see IN-BED TRUNK LID OPENER REPLACEMENT ).
Insert the key (A) to the in-bed trunk lid lock cylinder (B). Remove the lock cylinder by pulling out it while pulling the pin (C) with pliers (D).

Fig 1: Inserting Key To In-Bed Trunk Lid Lock Cylinder
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the lock cylinder in the reverse order of removal, and note these items:
- Position the lock cylinder with the pin hole (E) facing up. Push the lock cylinder into the opener until the pin clicks into place.
- Make sure the opener seat is installed properly.
- Make sure the in-bed trunk lid opens properly.