Washer Motor Test
- Remove the right front inner fender (see FRONT INNER FENDER REPLACEMENT
).
- Disconnect the 2P connector (A) from the washer motor (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Test the motor by connecting battery power to terminal No. 1 and ground terminal No. 2 of the washer motor. The motor should run.
- If the motor does not run or fails to run smoothly, replace it (see Washer Reservoir Replacement ).
- If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer tube, or a clogged washer motor outlet (see Washer Tube Replacement ).